YASKAWA 152964-1 Robot Tool Flange
YASKAWA 152964-1 Robot Tool Flange for same-part replacement in robot tooling assemblies; verify the installed part marking and equipment model before sourcing.
View details →
FANUC A61L-0001-0093 LCD Display
The FANUC A61L-0001-0093 LCD Display is a replacement display component; confirm the installed label and equipment details before sourcing.
View details →
KUKA 00-291-556 smartPAD 2 Teach Pendant
KUKA 00-291-556 smartPAD 2 Teach Pendant supports operator interaction; confirm the installed pendant label, controller model, and connector before sourcing.
View details →
ABB 3HAC043904-001 Upper Arm DressPack
ABB 3HAC043904-001 Upper Arm DressPack supports same-part-number replacement; confirm the installed label, equipment model, and revision before sourcing.
View details →
YASKAWA SGM7J-02AFC6S Brake Servo Motor
YASKAWA SGM7J-02AFC6S Brake Servo Motor for exact-part replacement; confirm the motor nameplate and equipment details before sourcing.
View details →
FANUC A02B-0309-K102 CompactFlash Memory Card
The FANUC A02B-0309-K102 CompactFlash Memory Card is for same-part-number replacement; verify the installed label and equipment details before sourcing.
View details →
KUKA KR 30 L16-2 Paint Robot
The KUKA KR 30 L16-2 Paint Robot is identified for paint-automation sourcing; confirm the nameplate, controller model, and installed configuration.
View details →
ABB IRB 1520ID Arc Welding Robot
ABB IRB 1520ID Arc Welding Robot for arc welding applications; confirm the model, equipment nameplate, controller, and system details before sourcing.
View details →
YASKAWA HW9380939-A Overtravel Limit Switch
YASKAWA HW9380939-A Overtravel Limit Switch supports overtravel limit detection; verify the installed switch label and equipment nameplate before sourcing.
View details →
FANUC A290-7324-X201 Wrist Flange
FANUC A290-7324-X201 Wrist Flange for same-part-number replacement in a robot wrist assembly; verify the installed part marking and equipment nameplate.
View details →
KUKA 00-130-547 KCP2 Membrane Keypad
KUKA 00-130-547 KCP2 Membrane Keypad supports same-part replacement sourcing; confirm the pendant label, revision and equipment nameplate.
View details →
ABB DSQC611 3HAC13389-2 Teach Pendant
ABB DSQC611 3HAC13389-2 Teach Pendant for same-part replacement; confirm the installed label, controller model, and equipment nameplate.
View details →
YASKAWA SGDV-1R6A01A Servo Drive
YASKAWA SGDV-1R6A01A Servo Drive for same-model replacement; confirm the installed label, equipment model, and connector details before sourcing.
View details →
FANUC A06B-6079-H206 Servo Amplifier Module
FANUC A06B-6079-H206 Servo Amplifier Module for replacement sourcing; verify the installed-unit label, controller, and connectors before purchase.
View details →
KUKA 00-198-265 (KSP 600-3x20) Servo Drive
KUKA 00-198-265 (KSP 600-3x20) Servo Drive for same-part replacement; confirm the installed-unit label, controller, and connectors before sourcing.
View details →
ABB DSQC 1000 (3HAC042766-001) Main Computer
ABB DSQC 1000 (3HAC042766-001) Main Computer for same-part replacement; confirm the installed label, controller model and connectors before sourcing.
View details →
YASKAWA JANCD-YEW01-E Robot Control Board
The YASKAWA JANCD-YEW01-E robot control board is suitable for fault repair, replacement of damaged board components, and spare parts inventory for industrial robot control systems. It can be used to address equipment downtime issues caused by control board abnormalities. Before procurement, it is crucial to verify the complete model number and suffix, board version, interface layout, physical condition, repair history, and delivery list. Consistency should be confirmed using actual photographs, label information, and the original board on-site.
View details →
FANUC A06B-6114-H106 Servo Drive
The FANUC A06B-6114-H106 is a servo drive for industrial automation systems, primarily used for the repair and replacement of faulty drive units, replenishment of production line spare parts, and restoration after shutdown maintenance. Before procurement, verify the complete model number, interface type, installation location, external condition, and accessory scope against the equipment nameplate and original component label. If there are differences in suffixes, versions, or configurations, provide clear photos and confirm the delivery status before placing the order.
View details →
KUKA KSD1-16 Servo Drive
The KUKA KSD1-16 is a servo drive for industrial automation, suitable for the repair and replacement of faulty drive units, replenishment of on-site spare parts, and restoration of equipment operation. Before procurement, verify the complete model number, nameplate information, hardware version, interface and terminal appearance, product condition, testing status, and included accessories. Always refer to the original equipment and technical documentation to avoid installation and commissioning issues due to version or configuration discrepancies.
View details →
ABB DSQC 328A (3HAC17970-1) Digital I/O Control Board
The ABB DSQC 328A (3HAC17970-1) is a digital I/O control board used for the maintenance of industrial robots and automation control systems, primarily for fault board troubleshooting, replacement, and spare parts inventory. Before procurement, it is crucial to verify that both the model number and order number match simultaneously, and to compare the board label, interface layout, hardware version, physical condition, and included accessories; if the original board has an alternative number or revision differences, it is recommended to provide nameplate and physical photos for confirmation to avoid installation and commissioning issues due to version or connection type mismatches.
View details →
YASKAWA SGDV-080A01A Sigma-5 Servo Drive
The YASKAWA SGDV-080A01A Sigma-5 Servo Drive is used to provide closed-loop control of position, speed, and torque for matched Sigma-5 motors. It is suitable for repair or replacement following servo alarms, failure to enable, overcurrent, overvoltage, encoder, or positioning abnormalities.
View details →
YASKAWA SGDV-100A01A Sigma-5 Servo Drive
The YASKAWA SGDV-100A01A Sigma-5 Servo Drive is used for performing servo power drive, feedback closed-loop control, alarm diagnosis, and operational protection. It is suitable for repair or replacement after failures such as drive not ready, overcurrent, overheating, regeneration alarm, feedback, or communication faults.
View details →
YASKAWA SGMGV-09ADA61 Sigma-5 Servo Motor
The YASKAWA SGMGV-09ADA61 Sigma-5 servo motor is used to convert driver output into stable rotational motion and feedback position and speed. It is suitable for repair or replacement after occurrences such as motor overheating, abnormal noise, vibration, encoder alarms, positioning deviation, or bearing wear.
View details →
YASKAWA SGMGV-20ADA61 Sigma-5 Servo Motor
The YASKAWA SGMGV-20ADA61 Sigma-5 servo motor is used to provide controlled rotational power and feed back operational status to the servo drive via an encoder. It is suitable for repair or replacement following occurrences such as abnormal temperature rise, operational vibration, increased noise, feedback alarms, or winding faults.
View details →
FANUC A06B-6150-H075 AiPS-75HV Power Supply Module
The FANUC A06B-6150-H075 AiPS-75HV power supply module is used to provide a stable DC bus for high-voltage servo or spindle amplifiers and manage regenerative energy. It is suitable for repair and replacement after occurrences such as the system failing to power on, abnormal bus voltage, overvoltage, overcurrent, overheating, or regeneration alarms.
View details →
FANUC A06B-6140-H006 Alpha i Power Supply Module
The FANUC A06B-6140-H006 Alpha i Power Supply Module is used to convert input power into the DC bus required by the servo drive system and performs power protection. It is suitable for repair and replacement after occurrences of power unit alarms, failure to become ready, bus abnormalities, overheating, or charging faults.
View details →
FANUC A06B-6140-H007 Alpha i Power Supply Module
The FANUC A06B-6140-H007 Alpha i Power Supply Module is used to provide DC bus and regenerative control for matching servo and spindle amplifiers. It is suitable for repair and replacement following occurrences of power-on failure, bus alarm, input phase loss, overcurrent, overheating, or regenerative abnormalities.
View details →
FANUC A06B-6140-H008 Alpha i Power Supply Module
The FANUC A06B-6140-H008 Alpha i Power Supply Module is used to complete drive system power supply, establish the DC bus, manage regenerative energy, and monitor status. It is suitable for repair or replacement following issues such as the power supply module not being ready, DC bus abnormalities, overvoltage, overcurrent, or temperature alarms.
View details →
KUKA 00-122-286 KSD1-32 UL Servo Drive Module
The KUKA 00-122-286 KSD1-32 UL servo drive module is used to provide servo power, feedback closed-loop control, and fault protection for a single robot axis. It is suitable for repair and replacement following KSD faults, axis failure to start, overcurrent, overtemperature, output, or bus voltage alarms.
View details →
KUKA 00-105-925 KSD1-08 Servo Drive Module
The KUKA 00-105-925 KSD1-08 servo drive module is used to control matched low-capacity robot axes and monitor current, feedback, and drive status. It is suitable for repair or replacement after failures such as axis enable failure, drive alarm, overcurrent, overheating, or abnormal output.
View details →
KUKA 00-105-414 KSD1-64 Servo Drive Module
The KUKA 00-105-414 KSD1-64 servo drive module is used to provide high-capacity servo output to the matching robot axis motor and perform drive protection. It is suitable for repair and replacement after faults such as drive not ready, overcurrent, overheating, DC bus abnormality, or axis operation failure.
View details →
KUKA 00-117-345 KSD1-64 UL Servo Drive Module
The KUKA 00-117-345 KSD1-64 UL servo drive module is used to provide power drive, closed-loop control, and operational protection for robot axes with higher current. It is suitable for repair or replacement following KSD alarms, axis enable failures, overcurrent, overheating, or DC bus/output abnormalities.
View details →
ABB DSQC639/3HAC025097-001 IRC5 Axis Computer Board
The ABB DSQC639/3HAC025097-001 IRC5 Axis Computer Board is used to execute robot motion calculations and coordinate axis control and internal controller communication. It is suitable for repair or replacement after occurrences such as abnormal controller startup, axis calculation alarms, system communication interruptions, or board failures.
View details →
ABB DSQC609/3HAC14178-1 IRC5 Customer I/O Power Box
The ABB DSQC609/3HAC14178-1 IRC5 Customer I/O Power Box is used to provide controlled 24V DC power supply and power distribution for customer I/O and peripheral interfaces. It is suitable for repair and replacement after occurrences such as peripheral I/O having no power, abnormal 24V output, or fuse or power circuit alarms.
View details →
ABB DSQC664/3HAC030923-001 IRC5 Additional Drive Unit
The ABB DSQC664/3HAC030923-001 IRC5 Additional Drive Unit is used to provide high-voltage servo power output, feedback closed-loop control, and drive protection for additional mechanical axes. It is suitable for repair or replacement when issues such as the additional axis failing to enable, drive unit alarms, overcurrent, overheating, or communication abnormalities occur.
View details →
ABB DSQC655/3HAC025562-001 IRC5 Supercapacitor Unit
The ABB DSQC655/3HAC025562-001 IRC5 Supercapacitor Unit is used to maintain critical circuits and help preserve robot position-related data during unexpected power outages. It is suitable for repair and replacement after faults such as abnormal position data after a power loss, decreased capacitor capacity, charging failures, or module alarms.
View details →
YASKAWA SGDV-120A01A Sigma-5 Servo Drive
The YASKAWA SGDV-120A01A Sigma-5 Servo Drive belongs to the YASKAWA Sigma-5 SGDV series. It is used to provide closed-loop control of position, speed, and torque for matching Sigma-5 motors. It is suitable for repair or replacement following drive alarms, inability to enable, encoder abnormalities, overcurrent, overvoltage, or positioning instability.
View details →
YASKAWA SGDV-180A01A Sigma-5 Servo Drive
The YASKAWA SGDV-180A01A Sigma-5 Servo Drive belongs to the YASKAWA Sigma-5 SGDV series. It is used for executing servo power drive, motion closed-loop control, alarm diagnosis, and operational protection. It is suitable for repair or replacement after faults such as drive not ready, overcurrent, overvoltage, regeneration alarm, communication, or encoder errors.
View details →
YASKAWA SGMGV-13ADA61 Sigma-5 Servo Motor
The YASKAWA SGMGV-13ADA61 Sigma-5 servo motor belongs to the YASKAWA Sigma-5 SGMGV series. It is used to convert drive output into controlled rotational motion and provide feedback on rotor position and speed. It is suitable for repair or replacement following issues such as motor overheating, abnormal vibration/noise, encoder alarms, positioning deviation, or bearing wear.
View details →
FANUC A06B-6140-H011 Alpha i Power Supply Module
The FANUC A06B-6140-H011 Alpha i Power Supply Module belongs to the FANUC Alpha i Power Supply Module series. It is used to provide stable DC bus power and regenerative control for servo and spindle drive systems. It is suitable for repair or replacement following power supply module alarms, abnormal bus voltage, failure to power on, overheating, or charging circuit faults.
View details →
FANUC A06B-6140-H015 Alpha i Power Supply Module
The FANUC A06B-6140-H015 Alpha i Power Supply Module belongs to the FANUC Alpha i Power Supply Module series. It is used to provide DC bus power to matching servo and spindle amplifiers and manage regenerative energy. It is suitable for repair and replacement after issues such as the system failing to become ready, bus alarms, input phase loss, overcurrent, overheating, or regenerative abnormalities.
View details →
FANUC A06B-6150-H045 AiPS-45HV Power Supply Module
The FANUC A06B-6150-H045 AiPS-45HV Power Supply Module belongs to the FANUC Alpha i High Voltage Power Supply series. It is used to provide DC bus power to high-voltage servo or spindle amplifiers and performs power supply protection and regeneration management. It is suitable for repair and replacement after failures such as power supply failing to start, DC bus abnormalities, overvoltage, overcurrent, overheating, or regeneration alarms.
View details →
KUKA 00-105-351 KSD1-32 Servo Drive Module
The KUKA 00-105-351 KSD1-32 servo drive module belongs to the KRC2 KSD1 servo drive system. It is used to control a single robot axis motor and perform closed-loop current, speed, and position driving. It is suitable for repair or replacement after occurrences such as drive alarms, inability to enable the robot axis, overcurrent, overheating, or abnormal power output.
View details →
KUKA 00-122-285 KSD1-16 UL Servo Drive Module
The KUKA 00-122-285 KSD1-16 UL servo drive module belongs to the KRC2 KSD1 servo drive system. It is used to provide servo power output, feedback closed-loop control, and drive protection for the matching robot axis. It is suitable for repair and replacement after occurrences such as KSD alarms, axis failure to start, overcurrent, DC bus abnormalities, heat dissipation issues, or output faults.
View details →
KUKA 00-122-284 KSD1-08 UL Servo Drive Module
The KUKA 00-122-284 KSD1-08 UL servo drive module belongs to the KRC2 KSD1 servo drive system. It is used to drive compatible low-capacity robot axes and monitors current, feedback, and operational status. It is suitable for repair or replacement following failures such as axis enable failure, drive alarm, abnormal output, overcurrent, overheating, or communication faults.
View details →
ABB DSQC652/3HAC025917-001 Digital I/O Module
The ABB DSQC652/3HAC025917-001 Digital I/O Module belongs to the ABB IRC5 DSQC I/O series. It is used to expand the digital inputs and outputs of the robot controller and connect to peripheral devices and field signals. It is suitable for repair or replacement after issues such as unresponsive I/O points, DeviceNet communication abnormalities, module disconnection, or status indicator alarms.
View details →
ABB DSQC651/3HAC025784-001 Robot I/O Module
The ABB DSQC651/3HAC025784-001 Robot I/O Module belongs to the ABB IRC5 DSQC I/O series. It is used to connect digital and related peripheral I/O signals and communicate with the robot controller via fieldbus. It is suitable for repair or replacement after occurrences such as I/O abnormalities, module offline status, bus alarms, input/output inaction, or interface damage.
View details →
ABB DSQC653/3HAC025918-001 Combination I/O Module
The ABB DSQC653/3HAC025918-001 Combination I/O Module belongs to the ABB IRC5 DSQC I/O series. It is used to collect field input signals and output control commands, enabling interlocking between the robot and peripheral equipment. It is suitable for repair or replacement following failures such as module communication failure, abnormal I/O points, unresponsive peripheral equipment, or bus/power supply alarms.
View details →
YASKAWA SGD7S-200A00A Sigma-7 Servo Drive
The YASKAWA SGD7S-200A00A Sigma-7 Servo Drive belongs to the YASKAWA Sigma-7 SGD7S series. It is used to provide power drive, closed-loop control, alarm diagnostics, and operational protection for matched servo motors. It is suitable for repair or replacement when faults such as drive not ready, overcurrent, overvoltage, regeneration alarm, or encoder/communication abnormalities occur.
View details →
YASKAWA SGD7S-180AA0A Sigma-7 Servo Drive
The YASKAWA SGD7S-180AA0A Sigma-7 Servo Drive belongs to the YASKAWA Sigma-7 SGD7S series. It is used to execute position, speed, and torque closed-loop control and monitor motor feedback and drive status. It is suitable for repair or replacement after failures such as inability to enable, servo alarms, overcurrent, overheating, feedback anomalies, or positioning instability.
View details →
YASKAWA SGM7G-13AFC61 Sigma-7 Servo Motor
The YASKAWA SGM7G-13AFC61 Sigma-7 servo motor belongs to the YASKAWA Sigma-7 SGM7G series. It is used to convert driver output into highly responsive rotational motion and feedback rotor position and speed. It is suitable for repair or replacement in cases of motor overheating, abnormal vibration/noise, positioning deviation, encoder alarms, or bearing wear.
View details →
YASKAWA SGM7G-20AFC61 Sigma-7 Servo Motor
The YASKAWA SGM7G-20AFC61 Sigma-7 servo motor belongs to the YASKAWA Sigma-7 SGM7G series. It is used to provide precise rotational power and feedback motion status to the servo drive via an encoder. It is suitable for repair or replacement after occurrences such as abnormal temperature rise, operational vibration, increased noise, feedback alarms, or winding/bearing failures.
View details →
FANUC A06B-6240-H209 AiSV 80/80 Servo Amplifier
The FANUC A06B-6240-H209 AiSV 80/80 servo amplifier belongs to the FANUC Alpha i AiSV series. It is used to provide power amplification, closed-loop regulation, and operational protection for two matched servo axes. It is suitable for repair or replacement following occurrences such as amplifier alarms, axis enable failure, overcurrent, overheating, abnormal output, or communication faults.
View details →
FANUC A06B-6240-H125 AiSV 80-B Servo Amplifier
The FANUC A06B-6240-H125 AiSV 80-B Servo Amplifier belongs to the FANUC Alpha i AiSV series. It is used to receive control commands and drive the matching servo motor to perform position, speed, and torque control. It is suitable for repair or replacement after occurrences of servo alarms, axis failure to start, overcurrent, overheating, or abnormalities in the bus or power output.
View details →
FANUC A06B-6240-H169 AiSV 360S Servo Amplifier
The FANUC A06B-6240-H169 AiSV 360S servo amplifier belongs to the FANUC Alpha i AiSV series. It is used to provide controlled output, feedback closed-loop control, and drive protection for higher-power servo motors. It is suitable for repair or replacement following faults such as drive not ready, overcurrent or overheating, output phase loss, bus alarm, or abnormal axis operation.
View details →
FANUC A06B-6240-H103 AiSV 20-B Servo Amplifier
The FANUC A06B-6240-H103 AiSV 20-B Servo Amplifier belongs to the FANUC Alpha i AiSV series. It is used to convert controller commands into servo motor drive outputs and monitor feedback status. It is suitable for repair or replacement following servo alarms, failure to enable, positioning abnormalities, overcurrent, overheating, or module not ready conditions.
View details →
KUKA 00-181-563 KR C4 smartPAD 10-Meter Connection Cable
The KUKA 00-181-563 KR C4 smartPAD 10-meter connection cable belongs to the KR C4 smartPAD connection cable series. It is used to transmit power supply, communication, and safety operation signals between the control cabinet and the teach pendant. It is suitable for repair and replacement following incidents such as teach pendant disconnection, communication interruption, emergency stop circuit alarms, cable wear, or connector damage.
View details →
KUKA 00-216-801 KR C4 smartPAD Keyboard Assembly
The KUKA 00-216-801 KR C4 smartPAD keyboard assembly belongs to the KR C4 smartPAD operator panel series. It is used to receive menu, function key, and operational commands and transmit them to the teach pendant control system. It is suitable for repair and replacement in cases of key failure, accidental triggering, localized unresponsiveness, panel wear, or membrane rupture.
View details →
KUKA 00-189-002 KR C4 smartPAD Touch Screen Component
The KUKA 00-189-002 KR C4 smartPAD touch screen component belongs to the KR C4 smartPAD display and touch series. It is used to provide touch input and, in conjunction with the display module, complete human-machine interaction operations. It is suitable for repair and replacement after issues such as touch drift, partial failure, no touch response, surface damage, or cable faults occur.
View details →
KUKA 00-128-456 KVGA 2.0 Interface Board
The KUKA 00-128-456 KVGA 2.0 interface board belongs to the KUKA controller display interface series. It is used to connect the controller display and operator terminal, handling related graphical output and interface signals. It is suitable for repair or replacement when issues such as no display, screen corruption, abnormal startup screen, operator terminal communication failure, or board damage occur.
View details →
YASKAWA SGD7S-120A00A Sigma-7 Servo Drive
The YASKAWA SGD7S-120A00A belongs to the Sigma-7 SGD7S series of servo drives, designed for high-response control matching rotary servo motors. It is suitable for replacement after drive alarms, failure to enable, or output stage faults.
View details →
YASKAWA SGD7S-180A00A Sigma-7 Servo Drive
The YASKAWA SGD7S-180A00A is a Sigma-7 series single-axis SERVOPACK designed for precise control of higher-capacity servo axes, suitable for replacement after drive alarms, abnormal power output, or communication failures.
View details →
YASKAWA SGM7J-08AFC6S Sigma-7 Servo Motor
The YASKAWA SGM7J-08AFC6S is a Sigma-7 medium inertia rotary servo motor with a rated power of 750W, suitable for replacement after precision positioning axes experience overheating, abnormal noise, encoder feedback anomalies, or winding faults.
View details →
YASKAWA SGM7J-04AFA6C Sigma-7 Servo Motor
The YASKAWA SGM7J-04AFA6C is a Sigma-7 SGM7J medium inertia servo motor, suitable for high-speed response and precision positioning mechanisms, commonly used for replacement after motor overheating, vibration, feedback anomalies, or bearing damage.
View details →
FANUC A06B-6240-H104 AiSV 40-B Servo Amplifier
The FANUC A06B-6240-H104 is an AiSV 40-B servo amplifier responsible for power driving and closed-loop control of a single-axis motor. It is suitable for replacement following axis alarms, output abnormalities, or amplifier hardware damage.
View details →
FANUC A06B-6240-H106 AiSV Servo Amplifier
The FANUC A06B-6240-H106 is an AiSV servo amplifier from the A06B-6240 series, used to drive and control compatible AC servo motors. It is suitable for repair and replacement following amplifier alarms, axis enable failures, or power unit damage.
View details →
FANUC A06B-6240-H205 AiSV 20/20 Servo Amplifier
The FANUC A06B-6240-H205 is an AiSV 20/20 dual-axis servo amplifier that provides power output for two matching servo axes. It is suitable for replacement after dual-axis alarms, drive not ready conditions, or module damage.
View details →
FANUC A06B-6240-H308 AiSV 40/40/40-B Servo Amplifier
The FANUC A06B-6240-H308 is an AiSV 40/40/40-B three-axis servo amplifier, used for centralized drive control in multi-axis equipment, suitable for replacement after power module failure, multi-axis enable abnormalities, or overcurrent alarms.
View details →
KUKA 00-235-627 KR C4 CCU Control Unit
The KUKA 00-235-627 is a CCU (Cabinet Control Unit) used in KR C4 and KR C4 extended control cabinets. It is responsible for internal power distribution and communication interface management, suitable for replacement after control cabinet startup failures, bus communication issues, or power supply abnormalities.
View details →
KUKA 00-188-812 KR C4 CIB SR Interface Board
The KUKA 00-188-812 is a CIB SR interface board used in KR C4 small robot control cabinets. It is responsible for connecting cabinet interfaces and safety-related signals, suitable for replacement in cases of I/O, safety circuit, or interface communication abnormalities.
View details →
KUKA 00-198-266 KSP 600-3x20 UL Servo Drive
The KUKA 00-198-266 is a KSP 600-3x20 UL three-axis servo drive used in KR C4 systems, providing power control for robot axes. It is suitable for replacement following KSP alarms, multiple axes failing to enable, or output abnormalities.
View details →
KUKA 00-174-775 KR C4 X21 Encoder Feedback Cable
KUKA 00-174-775 is an encoder feedback cable for the X21 interface of the KR C4 control cabinet, used for transmitting robot position feedback signals. It is suitable for replacement after cable wear, broken cores, or intermittent feedback communication abnormalities.
View details →
YASKAWA YRC1000 Robot CPU Unit
The Yaskawa YRC1000 CPU Unit is used for robot system computation, program management, and device communication. It is suitable for repair and replacement after controller failure to start, system abnormalities, or main control hardware damage.
View details →
YASKAWA DX200 Robot Safety Circuit Board
The YASKAWA DX200 safety circuit board is used for processing emergency stop, safety door, and servo enable signals. It is suitable for repair or replacement following safety link abnormalities, inability to reset an emergency stop, or board damage.
View details →
YASKAWA Sigma-II Servo Motor Power Cable
The Yaskawa Sigma-II power cable is used for power connection between SGDM or SGDH servo drives and their matching servo motors. It is suitable for replacement when the cable is aged, has insulation abnormalities, or has damaged connectors.
View details →
YASKAWA Sigma-5 Servo Encoder Cable
The Yaskawa Sigma-5 encoder cable is used for position feedback connection between SGDV drives and matching motors, suitable for replacement after encoder alarms, unstable feedback, broken cores, or connector damage.
View details →
FANUC R-30iB EtherNet/IP Communication Board
The FANUC R-30iB EtherNet/IP Communication Board is used for data exchange between the robot controller and PLCs or production networks. It is suitable for repair or replacement following communication dropouts, node connection failures, or interface damage.
View details →
FANUC R-30iA Controller Power Supply Unit
The FANUC R-30iA Controller Power Supply Unit is used for stable power supply inside the control cabinet, suitable for repair and replacement after controller failure to start, repeated restarts, abnormal output, or module damage.
View details →
FANUC Alpha i Servo Motor Power Cable
The FANUC Alpha i power cable is used for power connection between the servo amplifier and the motor, suitable for replacement after cable aging, insulation degradation, connector burn-out, or axis operation alarms.
View details →
FANUC Alpha i Encoder Feedback Cable
The FANUC Alpha i encoder feedback cable is used for transmitting servo motor position data, suitable for replacement after feedback loss, encoder alarms, cable core breakage, or connector damage.
View details →
KUKA KR C4 ESC Safety Control Board
The KUKA KR C4 ESC Safety Control Board is used for robot emergency stop, safety door, and drive enable management. It is suitable for repair or replacement following safety circuit alarms, servo enable failures, or board damage.
View details →
KUKA KR C4 DSE Motion Control Board
The KUKA KR C4 DSE Motion Control Board is used for motion data processing between the controller and the drive system, suitable for axis control, drive communication, or repair and replacement after board hardware abnormalities.
View details →
KUKA KSP 600-3x20 Servo Drive
The KUKA KSP 600-3x20 is used for multi-axis servo drive in KR C4 robots, suitable for repair selection after faults such as overcurrent, overheating, inability to enable, or power module damage.
View details →
KUKA KR C4 Control Cabinet Cooling Fan Assembly
The KUKA KR C4 cooling fan assembly is used for internal air circulation and module cooling within the control cabinet. It is suitable for maintenance replacement after fan stoppage, abnormal noise, reduced speed, or overtemperature alarms.
View details →
FANUC Alpha i64 Servo Motor Pulse Encoder
The FANUC A860-0370-V501 is a position feedback encoder for the Alpha i64 system servo motor. It collects position and motion feedback signals from the motor shaft and transmits the data to the servo control system.
View details →
ABB IRB 1200 Robot CP/CS Internal Body Cable
ABB 3HAC032296-001 is a CP/CS internal body cable suitable for the IRB 1200 industrial robot, used for transmitting related signals and connection circuits inside the robot body.
View details →
ABB IRB 2400 Robot Internal Cables for Axes 4–6
ABB 3HAC9328-1 is an internal body cable for the IRB 2400 industrial robot, primarily installed in the robot's upper arm area, providing signal transmission for motors, feedback, and connection circuits related to Axis 4, Axis 5, and Axis 6.
View details →
YASKAWA Sigma-7 Servo Drive
The Yaskawa SGD7S series servo drive is used for the Sigma-7 motion control system, suitable for selection and replacement in cases of drive alarm, inability to enable, positioning abnormalities, or after the original module is damaged.
View details →
YASKAWA Sigma-7 Servo Motor
The Yaskawa SGM7J series servo motor is suitable for Sigma-7 automation motion axes and is an appropriate choice for repair and selection after failures such as motor overheating, vibration, encoder, or brake malfunctions.
View details →
YASKAWA DX200 CPS Control Power Supply Module
The YASKAWA DX200 CPS control power supply module is used for internal power supply within the robot control cabinet. It is suitable for repair and replacement when the controller fails to start, has abnormal output voltage, experiences repeated restarts, or after module damage.
View details →
YASKAWA YRC1000 General I/O Module
The YASKAWA YRC1000 General I/O Module is used for signal interaction between the robot and fixtures, PLCs, and peripheral equipment. It is suitable for repair or replacement after I/O goes offline, signals become unresponsive, or interfaces are damaged.
View details →
FANUC I/O Unit Model A Interface Unit
FANUC A03B-0823-C001 is used for peripheral I/O connection in robots or CNC systems, suitable for repair and replacement after input/output signal loss, interface abnormalities, or module damage.
View details →
FANUC Controller Backup Battery
FANUC A98L-0031-0025 is used for backup power supply for the controller or related position data. It is suitable for replacement due to low battery voltage, maintenance cycle expiration, or aging of the original battery.
View details →
FANUC iPendant Teach Pendant Connection Cable
The FANUC iPendant connection cable is used for communication and safety signal connection between the teach pendant and the control cabinet. It is suitable for replacement after cable wear, broken cores, connector damage, or intermittent disconnections.
View details →
FANUC Alpha i Servo Motor Brake
The FANUC Alpha i series brake is used for servo motor holding at stop and axis fall prevention, suitable for repair and replacement after issues such as brake not releasing, insufficient braking force, coil abnormality, or mechanical wear.
View details →
KUKA KR C4 CCU Main Control Board
The KUKA KR C4 CCU main control board is used for internal power supply, safety, and interface management within the control cabinet. It is suitable for repair or replacement when the control cabinet fails to start, equipment communication is abnormal, or the board is damaged.
View details →
KUKA KR C4 KPC Industrial Computer
The KUKA KR C4 KPC industrial computer is used for robot system operation, program execution, and device communication. It is suitable for repair or replacement after failures such as the host computer failing to boot, hard disk failure, system freeze, or hardware damage.
View details →
KUKA smartPAD Teach Pendant Connection Cable
The KUKA smartPAD connection cable is used for transmitting power, communication, and safety signals between the teach pendant and the KR C4 control cabinet, suitable for replacement after wear, broken cores, or connector damage.
View details →
KUKA KPP 600 Series Power Module
The KUKA KPP 600 series modules are used for power supply and DC bus management in the KR C4 robot drive system, suitable for repair and selection for control cabinets with different power ratings and axis configurations.
View details →
KUKA KPP 600-20 Power Supply Module
The KUKA 00-198-259 KPP 600-20 is used for power supply and DC bus management in the KR C4 drive system. It is suitable for repair and replacement when the control cabinet cannot be enabled, the bus is abnormal, or the module is damaged.
View details →
KUKA smartPAD Robot Teach Pendant
The KUKA 00-168-334 smartPAD is used for robot jogging, program editing, and system maintenance. It is suitable for repair or replacement after failures such as black screen, touch failure, button or emergency stop malfunction, and connecting cable damage.
View details →
KUKA KSD1-48 Servo Drive
KUKA 00-117-344 KSD1-48 is used for robot axis drive matching the control cabinet, suitable for repair or replacement after drive overcurrent, overheating, inability to enable, or power module failure.
View details →
KUKA KR C4 RDC3 Position Feedback Board
The KUKA RDC3 is used for robot arm axis encoder data acquisition and position feedback, suitable for repair and replacement after zero point loss, encoder communication errors, machine data issues, or board hardware abnormalities.
View details →
YASKAWA Sigma-5 Servo Drive
The Yaskawa SGDV-200A01A belongs to the Sigma-5 series servo drive. It can form a motion control system with a matching motor and is suitable for addressing drive alarms, inability to enable, or for equipment upgrade and repair.
View details →
YASKAWA Sigma-5 Servo Motor
The Yaskawa SGMGV-30ADC61 belongs to the Sigma-5 series AC servo motor, suitable for automated motion axes with matching power and interfaces, and can be used for replacement after motor overheating, abnormal noise, or feedback faults.
View details →
YASKAWA DX200 Robot Teach Pendant
The Yaskawa JZRCR-YPP01-1 teach pendant is used for DX200 robot programming, jogging, and maintenance, suitable for repair or replacement after failures such as screen, keys, emergency stop, mode switch, or connection cable issues.
View details →
YASKAWA Robot I/O Interface Board
The YASKAWA JANCD-YIF01-E is used for robot control system I/O and interface signal processing, suitable for repair and replacement after external signal loss, interface abnormalities, communication failures, or board damage.
View details →
FANUC Alpha i Servo Amplifier
The FANUC A06B-6240-H105 belongs to the Alpha i series of servo amplifiers, used for power driving of matching equipment servo axes. It is suitable for repair or replacement after module alarms, axis enable failures, or power unit damage.
View details →
FANUC Alpha i Power Supply Module
FANUC A06B-6200-H030 is used for main circuit power supply in Alpha i servo systems, suitable for repair or replacement after failures such as the power module failing to start, abnormal bus voltage, regeneration alarms, or internal component damage.
View details →
FANUC Robot Teach Pendant
The FANUC A05B-2255-C101 teach pendant is used for robot jogging, program editing, and fault diagnosis. It is suitable for repair or replacement after issues such as black screen, touch or button failure, emergency stop abnormalities, and communication faults.
View details →
FANUC Robot Controller Mainboard
The FANUC A20B-8101-0280 controller mainboard is used for robot system computation, program and interface management. It is suitable for repair or replacement when the controller fails to start, experiences system abnormalities, communication faults, or board damage.
View details →
YASKAWA YRC1000 Robot Teach Pendant
The Yaskawa JZRCR-APP01-1 teach pendant is used for YRC1000 robot programming, jogging, status monitoring, and fault reset. It is suitable for repair or replacement after issues such as black screen, button failure, emergency stop abnormality, or communication faults.
View details →
YASKAWA Yaskawa SGDM-20ADA-V Servo Drive
The Yaskawa SGDM-20ADA-V is used for industrial automation servo axis control, suitable for drive fault repair, complete unit replacement, and spare parts stockpiling.
View details →
FANUC Robot Emergency Stop Unit
The FANUC A05B-2680-C422 emergency stop unit is used for robot safety shutdown and servo enable interlock, suitable for repair and replacement after issues such as emergency stop failure to reset, abnormal contacts, or safety circuit faults.
View details →
ABB Industrial Robot Arm Internal Cable
The ABB 3HAC024386-001 robot arm cable is used for internal power, control or feedback connections. It may be considered for sheath wear, broken cores, connector damage or intermittent faults that occur in a specific robot position. Confirm the robot version, original cable label, length, connectors, pin count and routing.
View details →
KUKA Robot KSP 600-3x40 Servo Drive
The KUKA KSP 600-3x40 servo drive is used for multi-axis motor drive in KR C4 robots, suitable for repair or replacement following faults such as overcurrent, overheating, inability to enable, DC bus, or module communication errors.
View details →
KUKA KR C4 Compact Interface Board
The KUKA 00-188-971 interface board is used for power supply and I/O related connections in the KR C4 Compact control cabinet. It is suitable for repair or replacement in cases of 27V power supply issues, US1/US2 errors, or interface/board abnormalities.
View details →
ABB Spray Painting Robot PSIB-02 Safety Interface Board
ABB PSIB-02 3HNA010419-001 is used for processing safety and process interface signals in spray painting robots, suitable for repair or replacement after safety interlock anomalies, signal interruptions, or board failures.
View details →
ABB Robot DSQC679 Teach Pendant
The ABB DSQC679 Teach Pendant is used for operating, programming, and maintaining IRC5 robots, suitable for repair or replacement after issues such as black screen, touch offset, button failure, emergency stop malfunction, or communication interruption.
View details →
ABB Robot DSQC663 Servo Drive
The ABB DSQC663 servo drive is used for IRC5 robot axis motor control, suitable for repair or replacement after drive overcurrent, overheating, failure to enable, communication anomalies, or module damage.
View details →
ABB IRC5 Control Cabinet DSQC661 Power Supply
The ABB DSQC661 power supply is used for internal power supply in IRC5 control cabinets. It is suitable for repair or replacement when the controller fails to start, experiences unstable power supply, module disconnections, or after power supply hardware damage.
View details →
ABB Robot DSQC633 SMB Serial Measurement Board
The ABB DSQC633 SMB Serial Measurement Board is used for robot axis position feedback and revolution counter data management, suitable for encoder communication, revolution counter, and repair/replacement after battery or position anomalies.
View details →
ABB MU300 Robot Servo Motor
The ABB 3HAC040657-001/002 MU300 servo motor is used for matching robot or external axis motion control, suitable for repair and replacement after motor overheating, abnormal noise, brake abnormalities, or encoder failures.
View details →
ABB Spray Painting Robot HPB-02B High Voltage Board
The ABB HPB-02B 3HNA019457-001 High Voltage Board is used for electrostatic high voltage control in spray painting robots. It is suitable for repair or replacement when high voltage cannot be established, output is unstable, frequent tripping occurs, or the board is damaged.
View details →
Yaskawa Robot Encoder Backup Battery
The Yaskawa HW0470475-A encoder backup battery may be considered when battery voltage is low, the battery has aged or the maintenance interval has ended. Confirm the battery model, voltage, plug, polarity, cable length, installation position and controller replacement procedure.
View details →
Yaskawa 3 kW Servo Package
The Yaskawa SGMGV-30ADC61 motor and SGDV-200A01A drive form a 3 kW, 200 V servo package for compatible automation axes. Confirm the supply voltage, power, control method, brake, encoder, shaft, options, interfaces and mounting dimensions before selection.
View details →
FANUC High-Speed Communication Fiber-Optic Cable
The FANUC A02B-0236-K852 fiber-optic cable is used for high-speed communication in compatible CNC and automation control systems. It may be considered for communication interruption, offline modules, startup faults, intermittent alarms or damaged fiber connectors. Confirm the complete model, cable length, interfaces, connected equipment, route and minimum bend radius.
View details →
FANUC R-30iA Dual-Axis Servo Amplifier
The FANUC A06B-6117-H207 dual-axis servo amplifier is used in compatible R-30iA control systems. It may be considered when related axes cannot enable, the amplifier alarms, or overcurrent, overload, overheating or communication faults occur. Confirm the controller model, module suffix, capacity, axes, power input, connectors and original parameters.
View details →
FANUC Servo Motor Encoder
The FANUC A290-0561-V503 encoder provides position feedback for compatible servo motors and automation equipment. It may be considered for lost feedback, positioning faults or encoder damage. Confirm the original encoder, motor nameplate, mounting interface, connector, feedback protocol and hardware version.
View details →
FANUC Servo Control Side Board
The FANUC A20B-2101-0355 servo control side board may be considered for board faults, interface problems or servo-control abnormalities in compatible FANUC control systems and CNC equipment. Confirm the full board number, main board or drive model, hardware version, interface position and system configuration.
View details →
KUKA KR120-KR300 Robot Dresspack
The KUKA KR120-KR300 Dresspack routes cables, air lines and process lines to end-of-arm tools. It can be matched to the robot model, process and interface requirements. Confirm the robot model, reach, line count, connectors, length, fixing method, motion range and site photographs.
View details →
ABB Robot Axis Computer Board
The ABB DSQC668 / 3HAC029157-001 axis computer board is used for axis control and drive communication in compatible IRC5 systems. It may be considered for axis computer communication alarms, servo enable faults, multiple-axis abnormalities or board recognition problems. Confirm the cabinet model, DSQC number, part number, hardware version, backplane interface and system configuration.
View details →
ABB Robot Controller Main Computer Unit
The ABB 3HAC025527-001 controller main unit is part of compatible ABB robot control systems. It may be considered when the controller will not start, repeatedly restarts, cannot load programs, loses communication or does not respond. Confirm the cabinet model, main-unit number, hardware and software versions, storage media and complete backup.
View details →
ABB Robot Controller Safety Control Board
The ABB 3HAC020633-001 safety control board is used in compatible robot controller safety circuits. It may be considered for safety-chain reset faults, enable problems, emergency-stop status issues or automatic-mode startup faults. Confirm the cabinet model, part number, hardware version, safety configuration, terminals and external interlocks.
View details →
ABB Robot Motor Brake Board
The ABB 3HAC020967-001 motor brake board is used with compatible robot servo systems. It may be considered when a motor brake will not release, braking is abnormal or the board is damaged. Confirm the robot model, axis, motor, brake board number, power supply and connectors.
View details →
ABB IRB 1600 Robot Servo Motor
The ABB 3HAC021799-003 servo motor is used on compatible IRB 1600 robot joints. It may be considered for a joint that will not enable, servo alarms, overheating, abnormal noise, brake faults or feedback problems. Confirm the complete IRB 1600 model, serial information, axis, motor nameplate, flange and connector.
View details →
ABB IRB 1100 Robot Axis 6 Timing Belt
The ABB 3HAC061939-001 timing belt is used in the sixth-axis transmission of compatible IRB 1100 robots. It may be considered for belt wear, slack, tooth skipping, breakage or positioning deviation. Confirm the complete robot model, arm version, belt number, tooth profile, width and installation position.
View details →
ABB Paint Robot Rotary Cup Component
The ABB 1N2140 and 1C0344 rotary cup components are used in compatible robot paint-spraying atomizer systems. They may be considered for cup wear, contamination, deformation, imbalance or spray-pattern problems. Confirm the atomizer model, cup number, diameter, mounting interface, coating material and speed configuration.
View details →
KUKA Industrial Robot Connection Cable
The KUKA 00-138-382 connection cable is used with compatible KR240 C2 and related systems. It may be considered for cable ageing, broken cores, connector damage or intermittent communication faults. Confirm the robot and controller models, cable number, length, connectors, pin count and routing.
View details →
KUKA KR10 Robot Axis 4 Reducer
The KUKA 00-200-827 reducer is used on the fourth axis of compatible KR10 R1420 robots. It may be considered for joint noise, increased backlash, positioning deviation, oil leakage or transmission faults. Confirm the complete robot model, axis, reducer number, interface, ratio and mounting dimensions.
View details →
KUKA Robot CI3 Safety Circuit Board
The KUKA 00-111-230 CI3 safety circuit board processes safety signals in compatible robot controllers. It may be considered for safety circuit reset faults, servo enable problems, emergency-stop status issues or controller run-state faults. Confirm the cabinet model, board number, hardware version, connectors and safety configuration.
View details →
Yaskawa AC Servo Motor
The Yaskawa SGMGH-20ACA61 AC servo motor is used in compatible automation axes, robot applications and mechanical drive systems. It may be considered for motor overheating, bearing noise, encoder faults, insulation issues or brake problems. Confirm the complete motor specification, shaft, brake, encoder, flange and drive.
View details →
Yaskawa Robot Communication and CPU Board
The Yaskawa JANCD-YCP21-E communication and CPU board supports controller computation and communication in compatible Motoman systems. It may be considered for controller startup faults, board offline conditions, communication interruption or board failure. Confirm the cabinet model, full board number, hardware and software versions, interfaces and system backup.
View details →
Yaskawa AC Servo Drive
The Yaskawa SGDH-04AE-OY AC servo drive is used for motion control in compatible automation systems and may be considered after drive alarms, damage or ageing. Confirm the complete model, input voltage, capacity, control method, motor, interface options and parameter backup.
View details →
ABB Industrial Robot Joint Servo Motor
The ABB 3HAC021722-001 AC servo motor is intended for compatible robot joint axes and may be considered after motor ageing, brake faults or feedback problems. Confirm the complete robot model, installed axis, original motor nameplate, brake, encoder, output shaft and mounting flange.
View details →
FANUC Industrial Robot Servo Amplifier
The FANUC A06B-6127-H208 servo amplifier controls servo axes and may be considered as a repair or replacement part for compatible FANUC robots, CNC systems and automation equipment. Confirm the complete model suffix, power input, axis capacity, connectors and hardware version before selection.
View details →
ABB Robot External Axis Communication Cable
The ABB 3HAC033548-002 cable connects a robot controller with external-axis equipment. It can be used to assess damaged cables, unstable communication or planned replacement on positioners, travelling axes and related equipment. Confirm the original part number, length, connector type, pin count and system configuration.
View details →
Robot Reducer and Main Shaft System Repair
Addresses abnormal noise, oil leakage, increased backlash, decreased positioning accuracy, and shaft system jamming.
View details →
Industrial Robot Teach Pendant Inspection and Repair
Covers black screen, touch offset, button failure, emergency stop circuit, and communication cable faults.
View details →
Yaskawa DX200 / YRC1000 Control System Repair
Handles servo not ready, encoder abnormalities, communication failures, and teach pendant issues.
View details →
FANUC R-30iB Servo Amplifier Repair
Addresses SRVO-type alarms, axes failing to enable, servo amplifier overcurrent, and power supply abnormalities.
View details →
KUKA KRC4 Controller and Teach Pendant Repair
Addressing smartPAD black screen, button failure, safety circuit alarms, and KRC4 controller faults.
View details →
ABB IRC5 Control Cabinet Inspection and Repair
Inspection of control systems for issues such as failure to start, communication interruption, servo alarms, and abnormal power loss.
View details →
Industrial Robot Control Cabinet and Servo Drive Inspection Service
Inspection and repair services for control cabinets, servo drives, teach pendants, and circuit boards at manufacturing sites.
View details →