ZhonghengbiaoZHB
Robot parts and independent repair support. From Foshan, China, to your next inquiry. Talk to us ›

Industrial Robot Parts & Repair Services

Controller, teach pendant, servo drive and robot mechanical repair services for ABB, KUKA, FANUC and Yaskawa equipment.

YASKAWA YRC1000 Robot CPU Unit
YASKAWA

YASKAWA YRC1000 Robot CPU Unit

The Yaskawa YRC1000 CPU Unit is used for robot system computation, program management, and device communication. It is suitable for repair and replacement after controller failure to start, system abnormalities, or main control hardware damage.

View details →
YASKAWA DX200 Robot Safety Circuit Board
YASKAWA

YASKAWA DX200 Robot Safety Circuit Board

The YASKAWA DX200 safety circuit board is used for processing emergency stop, safety door, and servo enable signals. It is suitable for repair or replacement following safety link abnormalities, inability to reset an emergency stop, or board damage.

View details →
YASKAWA Sigma-II Servo Motor Power Cable
YASKAWA

YASKAWA Sigma-II Servo Motor Power Cable

The Yaskawa Sigma-II power cable is used for power connection between SGDM or SGDH servo drives and their matching servo motors. It is suitable for replacement when the cable is aged, has insulation abnormalities, or has damaged connectors.

View details →
YASKAWA Sigma-5 Servo Encoder Cable
YASKAWA

YASKAWA Sigma-5 Servo Encoder Cable

The Yaskawa Sigma-5 encoder cable is used for position feedback connection between SGDV drives and matching motors, suitable for replacement after encoder alarms, unstable feedback, broken cores, or connector damage.

View details →
FANUC R-30iB EtherNet/IP Communication Board
FANUC

FANUC R-30iB EtherNet/IP Communication Board

The FANUC R-30iB EtherNet/IP Communication Board is used for data exchange between the robot controller and PLCs or production networks. It is suitable for repair or replacement following communication dropouts, node connection failures, or interface damage.

View details →
FANUC R-30iA Controller Power Supply Unit
FANUC

FANUC R-30iA Controller Power Supply Unit

The FANUC R-30iA Controller Power Supply Unit is used for stable power supply inside the control cabinet, suitable for repair and replacement after controller failure to start, repeated restarts, abnormal output, or module damage.

View details →
FANUC Alpha i Servo Motor Power Cable
FANUC

FANUC Alpha i Servo Motor Power Cable

The FANUC Alpha i power cable is used for power connection between the servo amplifier and the motor, suitable for replacement after cable aging, insulation degradation, connector burn-out, or axis operation alarms.

View details →
FANUC Alpha i Encoder Feedback Cable
FANUC

FANUC Alpha i Encoder Feedback Cable

The FANUC Alpha i encoder feedback cable is used for transmitting servo motor position data, suitable for replacement after feedback loss, encoder alarms, cable core breakage, or connector damage.

View details →
KUKA KR C4 ESC Safety Control Board
KUKA

KUKA KR C4 ESC Safety Control Board

The KUKA KR C4 ESC Safety Control Board is used for robot emergency stop, safety door, and drive enable management. It is suitable for repair or replacement following safety circuit alarms, servo enable failures, or board damage.

View details →
KUKA KR C4 DSE Motion Control Board
KUKA

KUKA KR C4 DSE Motion Control Board

The KUKA KR C4 DSE Motion Control Board is used for motion data processing between the controller and the drive system, suitable for axis control, drive communication, or repair and replacement after board hardware abnormalities.

View details →
KUKA KSP 600-3x20 Servo Drive
KUKA

KUKA KSP 600-3x20 Servo Drive

The KUKA KSP 600-3x20 is used for multi-axis servo drive in KR C4 robots, suitable for repair selection after faults such as overcurrent, overheating, inability to enable, or power module damage.

View details →
KUKA KR C4 Control Cabinet Cooling Fan Assembly
KUKA

KUKA KR C4 Control Cabinet Cooling Fan Assembly

The KUKA KR C4 cooling fan assembly is used for internal air circulation and module cooling within the control cabinet. It is suitable for maintenance replacement after fan stoppage, abnormal noise, reduced speed, or overtemperature alarms.

View details →
FANUC Alpha i64 Servo Motor Pulse Encoder
FANUC

FANUC Alpha i64 Servo Motor Pulse Encoder

The FANUC A860-0370-V501 is a position feedback encoder for the Alpha i64 system servo motor. It collects position and motion feedback signals from the motor shaft and transmits the data to the servo control system.

View details →
ABB IRB 1200 Robot CP/CS Internal Body Cable
ABB

ABB IRB 1200 Robot CP/CS Internal Body Cable

ABB 3HAC032296-001 is a CP/CS internal body cable suitable for the IRB 1200 industrial robot, used for transmitting related signals and connection circuits inside the robot body.

View details →
ABB IRB 2400 Robot Internal Cables for Axes 4–6
ABB

ABB IRB 2400 Robot Internal Cables for Axes 4–6

ABB 3HAC9328-1 is an internal body cable for the IRB 2400 industrial robot, primarily installed in the robot's upper arm area, providing signal transmission for motors, feedback, and connection circuits related to Axis 4, Axis 5, and Axis 6.

View details →
YASKAWA Sigma-7 Servo Drive
YASKAWA

YASKAWA Sigma-7 Servo Drive

The Yaskawa SGD7S series servo drive is used for the Sigma-7 motion control system, suitable for selection and replacement in cases of drive alarm, inability to enable, positioning abnormalities, or after the original module is damaged.

View details →
YASKAWA Sigma-7 Servo Motor
YASKAWA

YASKAWA Sigma-7 Servo Motor

The Yaskawa SGM7J series servo motor is suitable for Sigma-7 automation motion axes and is an appropriate choice for repair and selection after failures such as motor overheating, vibration, encoder, or brake malfunctions.

View details →
YASKAWA DX200 CPS Control Power Supply Module
YASKAWA

YASKAWA DX200 CPS Control Power Supply Module

The YASKAWA DX200 CPS control power supply module is used for internal power supply within the robot control cabinet. It is suitable for repair and replacement when the controller fails to start, has abnormal output voltage, experiences repeated restarts, or after module damage.

View details →
YASKAWA YRC1000 General I/O Module
YASKAWA

YASKAWA YRC1000 General I/O Module

The YASKAWA YRC1000 General I/O Module is used for signal interaction between the robot and fixtures, PLCs, and peripheral equipment. It is suitable for repair or replacement after I/O goes offline, signals become unresponsive, or interfaces are damaged.

View details →
FANUC I/O Unit Model A Interface Unit
FANUC

FANUC I/O Unit Model A Interface Unit

FANUC A03B-0823-C001 is used for peripheral I/O connection in robots or CNC systems, suitable for repair and replacement after input/output signal loss, interface abnormalities, or module damage.

View details →
FANUC Controller Backup Battery
FANUC

FANUC Controller Backup Battery

FANUC A98L-0031-0025 is used for backup power supply for the controller or related position data. It is suitable for replacement due to low battery voltage, maintenance cycle expiration, or aging of the original battery.

View details →
FANUC iPendant Teach Pendant Connection Cable
FANUC

FANUC iPendant Teach Pendant Connection Cable

The FANUC iPendant connection cable is used for communication and safety signal connection between the teach pendant and the control cabinet. It is suitable for replacement after cable wear, broken cores, connector damage, or intermittent disconnections.

View details →
FANUC Alpha i Servo Motor Brake
FANUC

FANUC Alpha i Servo Motor Brake

The FANUC Alpha i series brake is used for servo motor holding at stop and axis fall prevention, suitable for repair and replacement after issues such as brake not releasing, insufficient braking force, coil abnormality, or mechanical wear.

View details →
KUKA KR C4 CCU Main Control Board
KUKA

KUKA KR C4 CCU Main Control Board

The KUKA KR C4 CCU main control board is used for internal power supply, safety, and interface management within the control cabinet. It is suitable for repair or replacement when the control cabinet fails to start, equipment communication is abnormal, or the board is damaged.

View details →

Discuss your requirements

Send the model, part number, quantity and destination country, or describe the equipment fault. Our team will review your sourcing or repair requirements.

Contact Us