
YASKAWA SGD7S-200A00A Sigma-7 Servo Drive
The YASKAWA SGD7S-200A00A Sigma-7 Servo Drive belongs to the YASKAWA Sigma-7 SGD7S series. It is used to provide power drive, closed-loop control, alarm diagnostics, and operational protection for matched servo motors. It is suitable for repair or replacement when faults such as drive not ready, overcurrent, overvoltage, regeneration alarm, or encoder/communication abnormalities occur.
View details →
YASKAWA SGD7S-180AA0A Sigma-7 Servo Drive
The YASKAWA SGD7S-180AA0A Sigma-7 Servo Drive belongs to the YASKAWA Sigma-7 SGD7S series. It is used to execute position, speed, and torque closed-loop control and monitor motor feedback and drive status. It is suitable for repair or replacement after failures such as inability to enable, servo alarms, overcurrent, overheating, feedback anomalies, or positioning instability.
View details →
YASKAWA SGM7G-13AFC61 Sigma-7 Servo Motor
The YASKAWA SGM7G-13AFC61 Sigma-7 servo motor belongs to the YASKAWA Sigma-7 SGM7G series. It is used to convert driver output into highly responsive rotational motion and feedback rotor position and speed. It is suitable for repair or replacement in cases of motor overheating, abnormal vibration/noise, positioning deviation, encoder alarms, or bearing wear.
View details →
YASKAWA SGM7G-20AFC61 Sigma-7 Servo Motor
The YASKAWA SGM7G-20AFC61 Sigma-7 servo motor belongs to the YASKAWA Sigma-7 SGM7G series. It is used to provide precise rotational power and feedback motion status to the servo drive via an encoder. It is suitable for repair or replacement after occurrences such as abnormal temperature rise, operational vibration, increased noise, feedback alarms, or winding/bearing failures.
View details →
FANUC A06B-6240-H209 AiSV 80/80 Servo Amplifier
The FANUC A06B-6240-H209 AiSV 80/80 servo amplifier belongs to the FANUC Alpha i AiSV series. It is used to provide power amplification, closed-loop regulation, and operational protection for two matched servo axes. It is suitable for repair or replacement following occurrences such as amplifier alarms, axis enable failure, overcurrent, overheating, abnormal output, or communication faults.
View details →
FANUC A06B-6240-H125 AiSV 80-B Servo Amplifier
The FANUC A06B-6240-H125 AiSV 80-B Servo Amplifier belongs to the FANUC Alpha i AiSV series. It is used to receive control commands and drive the matching servo motor to perform position, speed, and torque control. It is suitable for repair or replacement after occurrences of servo alarms, axis failure to start, overcurrent, overheating, or abnormalities in the bus or power output.
View details →
FANUC A06B-6240-H169 AiSV 360S Servo Amplifier
The FANUC A06B-6240-H169 AiSV 360S servo amplifier belongs to the FANUC Alpha i AiSV series. It is used to provide controlled output, feedback closed-loop control, and drive protection for higher-power servo motors. It is suitable for repair or replacement following faults such as drive not ready, overcurrent or overheating, output phase loss, bus alarm, or abnormal axis operation.
View details →
FANUC A06B-6240-H103 AiSV 20-B Servo Amplifier
The FANUC A06B-6240-H103 AiSV 20-B Servo Amplifier belongs to the FANUC Alpha i AiSV series. It is used to convert controller commands into servo motor drive outputs and monitor feedback status. It is suitable for repair or replacement following servo alarms, failure to enable, positioning abnormalities, overcurrent, overheating, or module not ready conditions.
View details →
KUKA 00-181-563 KR C4 smartPAD 10-Meter Connection Cable
The KUKA 00-181-563 KR C4 smartPAD 10-meter connection cable belongs to the KR C4 smartPAD connection cable series. It is used to transmit power supply, communication, and safety operation signals between the control cabinet and the teach pendant. It is suitable for repair and replacement following incidents such as teach pendant disconnection, communication interruption, emergency stop circuit alarms, cable wear, or connector damage.
View details →
KUKA 00-216-801 KR C4 smartPAD Keyboard Assembly
The KUKA 00-216-801 KR C4 smartPAD keyboard assembly belongs to the KR C4 smartPAD operator panel series. It is used to receive menu, function key, and operational commands and transmit them to the teach pendant control system. It is suitable for repair and replacement in cases of key failure, accidental triggering, localized unresponsiveness, panel wear, or membrane rupture.
View details →
KUKA 00-189-002 KR C4 smartPAD Touch Screen Component
The KUKA 00-189-002 KR C4 smartPAD touch screen component belongs to the KR C4 smartPAD display and touch series. It is used to provide touch input and, in conjunction with the display module, complete human-machine interaction operations. It is suitable for repair and replacement after issues such as touch drift, partial failure, no touch response, surface damage, or cable faults occur.
View details →
KUKA 00-128-456 KVGA 2.0 Interface Board
The KUKA 00-128-456 KVGA 2.0 interface board belongs to the KUKA controller display interface series. It is used to connect the controller display and operator terminal, handling related graphical output and interface signals. It is suitable for repair or replacement when issues such as no display, screen corruption, abnormal startup screen, operator terminal communication failure, or board damage occur.
View details →
YASKAWA SGD7S-120A00A Sigma-7 Servo Drive
The YASKAWA SGD7S-120A00A belongs to the Sigma-7 SGD7S series of servo drives, designed for high-response control matching rotary servo motors. It is suitable for replacement after drive alarms, failure to enable, or output stage faults.
View details →
YASKAWA SGD7S-180A00A Sigma-7 Servo Drive
The YASKAWA SGD7S-180A00A is a Sigma-7 series single-axis SERVOPACK designed for precise control of higher-capacity servo axes, suitable for replacement after drive alarms, abnormal power output, or communication failures.
View details →
YASKAWA SGM7J-08AFC6S Sigma-7 Servo Motor
The YASKAWA SGM7J-08AFC6S is a Sigma-7 medium inertia rotary servo motor with a rated power of 750W, suitable for replacement after precision positioning axes experience overheating, abnormal noise, encoder feedback anomalies, or winding faults.
View details →
YASKAWA SGM7J-04AFA6C Sigma-7 Servo Motor
The YASKAWA SGM7J-04AFA6C is a Sigma-7 SGM7J medium inertia servo motor, suitable for high-speed response and precision positioning mechanisms, commonly used for replacement after motor overheating, vibration, feedback anomalies, or bearing damage.
View details →
FANUC A06B-6240-H104 AiSV 40-B Servo Amplifier
The FANUC A06B-6240-H104 is an AiSV 40-B servo amplifier responsible for power driving and closed-loop control of a single-axis motor. It is suitable for replacement following axis alarms, output abnormalities, or amplifier hardware damage.
View details →
FANUC A06B-6240-H106 AiSV Servo Amplifier
The FANUC A06B-6240-H106 is an AiSV servo amplifier from the A06B-6240 series, used to drive and control compatible AC servo motors. It is suitable for repair and replacement following amplifier alarms, axis enable failures, or power unit damage.
View details →
FANUC A06B-6240-H205 AiSV 20/20 Servo Amplifier
The FANUC A06B-6240-H205 is an AiSV 20/20 dual-axis servo amplifier that provides power output for two matching servo axes. It is suitable for replacement after dual-axis alarms, drive not ready conditions, or module damage.
View details →
FANUC A06B-6240-H308 AiSV 40/40/40-B Servo Amplifier
The FANUC A06B-6240-H308 is an AiSV 40/40/40-B three-axis servo amplifier, used for centralized drive control in multi-axis equipment, suitable for replacement after power module failure, multi-axis enable abnormalities, or overcurrent alarms.
View details →
KUKA 00-235-627 KR C4 CCU Control Unit
The KUKA 00-235-627 is a CCU (Cabinet Control Unit) used in KR C4 and KR C4 extended control cabinets. It is responsible for internal power distribution and communication interface management, suitable for replacement after control cabinet startup failures, bus communication issues, or power supply abnormalities.
View details →
KUKA 00-188-812 KR C4 CIB SR Interface Board
The KUKA 00-188-812 is a CIB SR interface board used in KR C4 small robot control cabinets. It is responsible for connecting cabinet interfaces and safety-related signals, suitable for replacement in cases of I/O, safety circuit, or interface communication abnormalities.
View details →
KUKA 00-198-266 KSP 600-3x20 UL Servo Drive
The KUKA 00-198-266 is a KSP 600-3x20 UL three-axis servo drive used in KR C4 systems, providing power control for robot axes. It is suitable for replacement following KSP alarms, multiple axes failing to enable, or output abnormalities.
View details →
KUKA 00-174-775 KR C4 X21 Encoder Feedback Cable
KUKA 00-174-775 is an encoder feedback cable for the X21 interface of the KR C4 control cabinet, used for transmitting robot position feedback signals. It is suitable for replacement after cable wear, broken cores, or intermittent feedback communication abnormalities.
View details →