ZhonghengbiaoZHB
Robot parts and independent repair support. From Foshan, China, to your next inquiry. Talk to us ›
ABB Robot Repair

How to Perform Maintenance on ABB Industrial Robots? A Guide to Checking the Teach Pendant, Control Cabinet, and Mechanical Body

After prolonged continuous operation, ABB industrial robots may experience aging, loosening, wear, and abnormal heat dissipation in components such as the teach pendant, control cabinet, servo system, body cables, and mechanical joints. This article introduces the main aspects of ABB robot maintenance, covering daily inspections, teach pendant checks, control cabinet maintenance, mechanical body upkeep, and restart verification, to help factories identify potential faults early and reduce unplanned downtime.

How to Perform Maintenance on ABB Industrial Robots? A Guide to Checking the Teach Pendant, Control Cabinet, and Mechanical Body
In this article

How to Perform Maintenance and Upkeep on ABB Industrial Robots? Inspection Guide for Teach Pendants, Control Cabinets, and Mechanical Bodies

ABB industrial robots are widely used in automated production scenarios such as welding, handling, palletizing, spraying, and machine tool loading/unloading. After long-term operation, robots may experience issues such as abnormal noise during axis movement, positioning deviation, increased temperature in the control cabinet, poor contact in the teach pendant, and aging of body cables.

The purpose of maintenance and upkeep is not only to clean equipment and replace lubricating oil but, more importantly, to understand the equipment status through regular inspections, identifying and addressing potential issues before faults affect production.

1. What to Prepare Before ABB Robot Maintenance
Before starting maintenance, the robot's basic information and current operating status should be recorded, including:
- Robot model and body serial number.
- IRC5 or other controller model.
- System version and main configurations.
- Cumulative equipment operating time.
- Recent alarm codes and alarm records.
- Operating sounds, temperature, and vibration of each axis.
- Tool weight, center of gravity, and load parameters.
- Last maintenance time and replaced parts.
Maintenance personnel should also back up robot programs, system parameters, zero-point information, and important configurations. After backup, confirm that files can be read normally and note the equipment name and backup date.
For operations involving the interior of the control cabinet, body disassembly, or within the robot's movement area, follow on-site regulations to shut down, complete power-off, lockout, and tagout procedures.

2. What Items Should Be Checked During Daily Inspections
Daily inspections can be performed before each shift startup or during equipment handover, focusing on observing whether the robot exhibits any unusual states compared to normal operation.
- Check the robot body for oil leaks, oil stains, or abnormal seals.
- Check for friction sounds, impact sounds, or periodic abnormal noises during axis operation.
- Observe whether the robot shakes during startup, stopping, or turning.
- Check if body cables and tool cables are being pinched, pulled, or excessively bent.
- Confirm that bolts connecting the robot base, tool flange, and fixtures are not loose.
- Check the teach pendant screen, buttons, touch function, and emergency stop button.
- Observe whether the control cabinet fans are running and if the filter pads are clogged.
- Confirm that no new obstacles or mechanical interferences exist in the robot's working area.
If abnormalities are found, record specific axis numbers, movement directions, speeds, postures, and alarm information. Avoid vague descriptions such as "robot has abnormal noise" or "equipment is not operating normally."

3. Key Maintenance Points for ABB Teach Pendants
The teach pendant is a frequently used component and is susceptible to damage from drops, oil stains, dust, and cable pulling.
Daily inspection content includes:
- Whether the screen has black screens, white screens, distorted screens, bright lines, or dark areas.
- Whether touch positions are accurate, and if there is localized failure or automatic jumping.
- Whether physical buttons are responsive.
- Whether the emergency stop button can be pressed and reset normally.
- Whether the enabling device is functioning properly.
- Whether the teach pendant cable is damaged, flattened, or excessively bent.
- Whether connectors are locked and if pins are bent or oxidized.
After use, the teach pendant should be placed back on its dedicated holder and not left on the robot, fixture, or floor. When cleaning the screen, use cleaning products suitable for electronic devices to avoid liquids entering the housing.
If the teach pendant suddenly loses power when moved to a certain position, focus on checking cable bend points and connectors at both ends.

4. Key Maintenance Points for ABB Control Cabinets
The control cabinet interior contains components such as power supplies, drives, main units, communication modules, and safety modules. Dust, oil mist, high temperatures, and loose terminals can all affect system stability.
During maintenance, focus on checking:
- Whether the control cabinet door and sealing strips are intact.
- Whether air inlets, outlets, and filter pads are clogged.
- Whether cooling fans have stopped, produce abnormal noise, or have unstable speeds.
- Whether there is dust accumulation, moisture, or oil stains inside the cabinet.
- Whether module indicator light statuses are normal.
- Whether cable connectors and terminals are loose, discolored, or burnt.
- Whether grounding connections are reliable.
- Whether there are abnormal odors near drives, power modules, and the main unit.
The control cabinet cleaning cycle should be determined based on the on-site environment. Workshops with significant welding fumes, metal dust, or oil mist should shorten inspection cycles appropriately.
After the control cabinet is powered off, some internal components may still retain dangerous voltage. Before opening the control cabinet and performing electrical tests, follow the ABB equipment manual and wait for the specified discharge time.

5. Servo Motor and Drive System Inspection
Servo motors and drive systems directly affect the movement state of each robot axis. Common abnormalities include overcurrent, overheating, following error, encoder abnormalities, and servo enable failure.
During inspection, pay attention to:
- Whether there are significant temperature differences among axis motors.
- Whether motors produce grinding sounds, humming, or periodic abnormal noises during operation.
- Whether power cables and encoder feedback cables are damaged.
- Whether motor connectors are loose, have liquid ingress, or are burnt.
- Whether the robot alarms during acceleration, heavy loads, or specific postures.
- Whether the motor brake can release normally.
- Whether the control cabinet drive module cooling is normal.
When overcurrent alarms occur, do not immediately replace the drive. Mechanical jamming, excessive tool load, short circuits in power cables, and motor winding abnormalities can also cause the same fault.

6. How to Maintain the ABB Mechanical Body
Key maintenance points for the robot mechanical body include reducers, bearings, balancing devices, seals, the base, and the tool flange.
【Abnormal Noise During Robot Axis Movement】
Focus on checking the lubrication status of reducers, bearings, gears, and mechanical connection points. Record the axis number, direction, speed, and position corresponding to the abnormal noise.
【Oil Leakage from Robot Joints】
Check the location of the oil leak, oil color, and leakage range. Even minor surface oil stains should be cleaned and continuously observed to confirm if seepage continues.
【Robot Operation Shaking】
Check tool load parameters, mechanical clearance, reducer status, and base fastening. After a robot collision, also check zero points and positioning accuracy.
【Abnormal Temperature in a Single Axis】
Check mechanical resistance, lubrication status, motor, brake, and operating load. If the temperature continues to rise, shut down for troubleshooting.

The model, quantity, and replacement cycle of lubricating oil or grease should be based on the product manual corresponding to the robot model. Different axes and different robot models may use different lubricating materials, and mixing them is not advisable.
7. Inspection of Body Cables and Tool Cables
Cable faults often manifest as intermittent alarms. When the robot moves to a specific posture, the cables may be bent, squeezed, or stretched, leading to signal interruption or short circuits.
Focus should be placed on inspecting:
Moving cables near axes J1 to J6.
Connection lines between the body and the control cabinet.
Motor power lines and encoder feedback lines.
Welding gun, fixture, and sensor cables.
Communication lines for external axes and peripheral equipment.
Whether cable clamps and cable carriers are loose.
When outer sheath damage is found, it is also necessary to determine if internal conductors and shielding layers are damaged. Do not simply cover with tape and continue long-term operation.
8. Alarm Records and Fault Diagnosis
During maintenance, the robot's historical alarm records should be reviewed to analyze whether alarms are concentrated on a specific axis, a particular program, or a fixed time period.
【Frequent Alarms on a Fixed Axis】
Priority should be given to checking the motor, encoder, power line, reducer, and mechanical load of that axis.
【Alarms Occurring at Specific Positions】
Priority should be given to checking body cables, external cables, and mechanical interference.
【Alarms After Running for a Period of Time】
Priority should be given to checking control cabinet cooling, motor temperature rise, mechanical friction, and long-term load.
【Alarms During Acceleration or Deceleration】
Priority should be given to checking load parameters, tool center of gravity, drives, and mechanical resistance.
【Temporary Recovery After Control Cabinet Restart】
It is necessary to continue checking power supply, communication, module temperature, and internal circuits. Restarting should not be considered the final repair method.
Alarm codes may vary among different ABB controllers and system versions. Their specific meanings should be based on the corresponding equipment manual.
9. Regular Maintenance Recommendations
The maintenance cycle for ABB robots should be established based on operating time, workload, and workshop environment.
Per shift or daily:
Check alarm information, operating sounds, body oil leaks, cable status, and teach pendant functionality.
Monthly:
Check control cabinet filter pads, cooling fans, connectors, body cables, and mechanical fastening status.
Quarterly or semi-annually:
Analyze historical alarms and operating trends of each axis. Check motor temperature rise, mechanical clearance, tool load, and safety devices.
Annual maintenance:
Based on the robot model and cumulative operating time, check the lubrication system, reducers, brakes, motors, control cabinet, and backup data. Perform positioning and process verification.
The above cycles are for maintenance planning reference only. For equipment operating in high temperature, high humidity, dust, oil mist, welding fumes, or continuous operation, the corresponding inspection cycles should be shortened.
10. Post-Maintenance Restart Verification
After maintenance is completed, automatic production should not be resumed directly. The following checks should be performed in sequence:
Confirm that tools, parts, and cleaning supplies have been removed from the robot area.
Confirm that the control cabinet, protective covers, and connectors are restored to normal.
Confirm that emergency stops, safety doors, and other safety devices are effective.
Check the robot program, zero points, and load parameters.
Operate each axis separately at low speed.
Perform low-speed multi-axis coordinated motion and no-load trajectory tests.
Gradually restore normal speed and load.
Use process samples to check positioning accuracy and production quality.
Observe whether the robot exhibits abnormal sounds, vibrations, temperature rise, or alarms.
Record the maintenance items performed, issues found, and handling results.
11. Common Maintenance Misconceptions
Only cleaning the robot surface without checking alarms and operating status.
Repeatedly resetting alarms after discovery without saving historical records.
Only checking the control cabinet while neglecting mechanical loads and body cables.
Not confirming the fault scope before replacing motors or drives.
Not backing up programs, parameters, and zero point information before maintenance.
Using lubricating materials that do not meet requirements.
Not performing low-speed, no-load, and process verification after maintenance is completed.
These practices may lead to recurring faults and even cause parameter loss, positioning deviations, and secondary downtime.
12. Summary
ABB industrial robot maintenance should cover the teach pendant, control cabinet, servo system, mechanical body, body cables, and safety devices. Through daily inspections, regular maintenance, and historical alarm analysis, issues such as cable aging, mechanical resistance, abnormal cooling, and component wear can be detected in advance.
During maintenance, adhere to the principle of "record first, inspect next, handle last." After maintenance is completed, verification through low-speed single-axis operation, no-load coordinated motion, normal load operation, and process sample testing should be conducted to confirm the robot's stable operation.
Repair Consultation
For ABB robot maintenance or fault diagnosis, please provide the robot model, controller model, cumulative operating time, alarm codes, faulty axis number, and on-site photos or videos. Contact the maintenance engineer for further assessment.
Industrial Robot Repair Hotline: +86 18122009539
Contact Maintenance Engineer: +86 18122009539

Need a part or repair assessment?

Share the robot model, part number, fault details and destination country with our team.

Contact our team ↗
← All robot insights

Discuss your requirements

Send the model, part number, quantity and destination country, or describe the equipment fault. Our team will review your sourcing or repair requirements.

Contact Us