
FANUC A06B-6150-H075 AiPS-75HV Power Supply Module
The FANUC A06B-6150-H075 AiPS-75HV power supply module is used to provide a stable DC bus for high-voltage servo or spindle amplifiers and manage regenerative energy. It is suitable for repair and replacement after occurrences such as the system failing to power on, abnormal bus voltage, overvoltage, overcurrent, overheating, or regeneration alarms.
View details →
FANUC A06B-6140-H006 Alpha i Power Supply Module
The FANUC A06B-6140-H006 Alpha i Power Supply Module is used to convert input power into the DC bus required by the servo drive system and performs power protection. It is suitable for repair and replacement after occurrences of power unit alarms, failure to become ready, bus abnormalities, overheating, or charging faults.
View details →
FANUC A06B-6140-H007 Alpha i Power Supply Module
The FANUC A06B-6140-H007 Alpha i Power Supply Module is used to provide DC bus and regenerative control for matching servo and spindle amplifiers. It is suitable for repair and replacement following occurrences of power-on failure, bus alarm, input phase loss, overcurrent, overheating, or regenerative abnormalities.
View details →
FANUC A06B-6140-H008 Alpha i Power Supply Module
The FANUC A06B-6140-H008 Alpha i Power Supply Module is used to complete drive system power supply, establish the DC bus, manage regenerative energy, and monitor status. It is suitable for repair or replacement following issues such as the power supply module not being ready, DC bus abnormalities, overvoltage, overcurrent, or temperature alarms.
View details →
KUKA 00-122-286 KSD1-32 UL Servo Drive Module
The KUKA 00-122-286 KSD1-32 UL servo drive module is used to provide servo power, feedback closed-loop control, and fault protection for a single robot axis. It is suitable for repair and replacement following KSD faults, axis failure to start, overcurrent, overtemperature, output, or bus voltage alarms.
View details →
KUKA 00-105-925 KSD1-08 Servo Drive Module
The KUKA 00-105-925 KSD1-08 servo drive module is used to control matched low-capacity robot axes and monitor current, feedback, and drive status. It is suitable for repair or replacement after failures such as axis enable failure, drive alarm, overcurrent, overheating, or abnormal output.
View details →
KUKA 00-105-414 KSD1-64 Servo Drive Module
The KUKA 00-105-414 KSD1-64 servo drive module is used to provide high-capacity servo output to the matching robot axis motor and perform drive protection. It is suitable for repair and replacement after faults such as drive not ready, overcurrent, overheating, DC bus abnormality, or axis operation failure.
View details →
KUKA 00-117-345 KSD1-64 UL Servo Drive Module
The KUKA 00-117-345 KSD1-64 UL servo drive module is used to provide power drive, closed-loop control, and operational protection for robot axes with higher current. It is suitable for repair or replacement following KSD alarms, axis enable failures, overcurrent, overheating, or DC bus/output abnormalities.
View details →
ABB DSQC639/3HAC025097-001 IRC5 Axis Computer Board
The ABB DSQC639/3HAC025097-001 IRC5 Axis Computer Board is used to execute robot motion calculations and coordinate axis control and internal controller communication. It is suitable for repair or replacement after occurrences such as abnormal controller startup, axis calculation alarms, system communication interruptions, or board failures.
View details →
ABB DSQC609/3HAC14178-1 IRC5 Customer I/O Power Box
The ABB DSQC609/3HAC14178-1 IRC5 Customer I/O Power Box is used to provide controlled 24V DC power supply and power distribution for customer I/O and peripheral interfaces. It is suitable for repair and replacement after occurrences such as peripheral I/O having no power, abnormal 24V output, or fuse or power circuit alarms.
View details →
ABB DSQC664/3HAC030923-001 IRC5 Additional Drive Unit
The ABB DSQC664/3HAC030923-001 IRC5 Additional Drive Unit is used to provide high-voltage servo power output, feedback closed-loop control, and drive protection for additional mechanical axes. It is suitable for repair or replacement when issues such as the additional axis failing to enable, drive unit alarms, overcurrent, overheating, or communication abnormalities occur.
View details →
ABB DSQC655/3HAC025562-001 IRC5 Supercapacitor Unit
The ABB DSQC655/3HAC025562-001 IRC5 Supercapacitor Unit is used to maintain critical circuits and help preserve robot position-related data during unexpected power outages. It is suitable for repair and replacement after faults such as abnormal position data after a power loss, decreased capacitor capacity, charging failures, or module alarms.
View details →
YASKAWA SGDV-120A01A Sigma-5 Servo Drive
The YASKAWA SGDV-120A01A Sigma-5 Servo Drive belongs to the YASKAWA Sigma-5 SGDV series. It is used to provide closed-loop control of position, speed, and torque for matching Sigma-5 motors. It is suitable for repair or replacement following drive alarms, inability to enable, encoder abnormalities, overcurrent, overvoltage, or positioning instability.
View details →
YASKAWA SGDV-180A01A Sigma-5 Servo Drive
The YASKAWA SGDV-180A01A Sigma-5 Servo Drive belongs to the YASKAWA Sigma-5 SGDV series. It is used for executing servo power drive, motion closed-loop control, alarm diagnosis, and operational protection. It is suitable for repair or replacement after faults such as drive not ready, overcurrent, overvoltage, regeneration alarm, communication, or encoder errors.
View details →
YASKAWA SGMGV-13ADA61 Sigma-5 Servo Motor
The YASKAWA SGMGV-13ADA61 Sigma-5 servo motor belongs to the YASKAWA Sigma-5 SGMGV series. It is used to convert drive output into controlled rotational motion and provide feedback on rotor position and speed. It is suitable for repair or replacement following issues such as motor overheating, abnormal vibration/noise, encoder alarms, positioning deviation, or bearing wear.
View details →
FANUC A06B-6140-H011 Alpha i Power Supply Module
The FANUC A06B-6140-H011 Alpha i Power Supply Module belongs to the FANUC Alpha i Power Supply Module series. It is used to provide stable DC bus power and regenerative control for servo and spindle drive systems. It is suitable for repair or replacement following power supply module alarms, abnormal bus voltage, failure to power on, overheating, or charging circuit faults.
View details →
FANUC A06B-6140-H015 Alpha i Power Supply Module
The FANUC A06B-6140-H015 Alpha i Power Supply Module belongs to the FANUC Alpha i Power Supply Module series. It is used to provide DC bus power to matching servo and spindle amplifiers and manage regenerative energy. It is suitable for repair and replacement after issues such as the system failing to become ready, bus alarms, input phase loss, overcurrent, overheating, or regenerative abnormalities.
View details →
FANUC A06B-6150-H045 AiPS-45HV Power Supply Module
The FANUC A06B-6150-H045 AiPS-45HV Power Supply Module belongs to the FANUC Alpha i High Voltage Power Supply series. It is used to provide DC bus power to high-voltage servo or spindle amplifiers and performs power supply protection and regeneration management. It is suitable for repair and replacement after failures such as power supply failing to start, DC bus abnormalities, overvoltage, overcurrent, overheating, or regeneration alarms.
View details →
KUKA 00-105-351 KSD1-32 Servo Drive Module
The KUKA 00-105-351 KSD1-32 servo drive module belongs to the KRC2 KSD1 servo drive system. It is used to control a single robot axis motor and perform closed-loop current, speed, and position driving. It is suitable for repair or replacement after occurrences such as drive alarms, inability to enable the robot axis, overcurrent, overheating, or abnormal power output.
View details →
KUKA 00-122-285 KSD1-16 UL Servo Drive Module
The KUKA 00-122-285 KSD1-16 UL servo drive module belongs to the KRC2 KSD1 servo drive system. It is used to provide servo power output, feedback closed-loop control, and drive protection for the matching robot axis. It is suitable for repair and replacement after occurrences such as KSD alarms, axis failure to start, overcurrent, DC bus abnormalities, heat dissipation issues, or output faults.
View details →
KUKA 00-122-284 KSD1-08 UL Servo Drive Module
The KUKA 00-122-284 KSD1-08 UL servo drive module belongs to the KRC2 KSD1 servo drive system. It is used to drive compatible low-capacity robot axes and monitors current, feedback, and operational status. It is suitable for repair or replacement following failures such as axis enable failure, drive alarm, abnormal output, overcurrent, overheating, or communication faults.
View details →
ABB DSQC652/3HAC025917-001 Digital I/O Module
The ABB DSQC652/3HAC025917-001 Digital I/O Module belongs to the ABB IRC5 DSQC I/O series. It is used to expand the digital inputs and outputs of the robot controller and connect to peripheral devices and field signals. It is suitable for repair or replacement after issues such as unresponsive I/O points, DeviceNet communication abnormalities, module disconnection, or status indicator alarms.
View details →
ABB DSQC651/3HAC025784-001 Robot I/O Module
The ABB DSQC651/3HAC025784-001 Robot I/O Module belongs to the ABB IRC5 DSQC I/O series. It is used to connect digital and related peripheral I/O signals and communicate with the robot controller via fieldbus. It is suitable for repair or replacement after occurrences such as I/O abnormalities, module offline status, bus alarms, input/output inaction, or interface damage.
View details →
ABB DSQC653/3HAC025918-001 Combination I/O Module
The ABB DSQC653/3HAC025918-001 Combination I/O Module belongs to the ABB IRC5 DSQC I/O series. It is used to collect field input signals and output control commands, enabling interlocking between the robot and peripheral equipment. It is suitable for repair or replacement following failures such as module communication failure, abnormal I/O points, unresponsive peripheral equipment, or bus/power supply alarms.
View details →